With the Toggle button you can change the working of the cursor. The free programmable and the OK button are meant for future purposes.
The buttons on the right side of the screen are used to control the volume and channel: Channel up, Channel down, Mute, Volume up and Volume down. Although these buttons each have a predefined function, you can program them yourself.
If you learn one of these buttons or assign a macro to it, its predefined function will be permanently lost. When your ProntoPro NG is placed in the docking station, you can connect. The most important ones are:. ProntoPro NG supports transparency in buttons and other objects.
This makes it easier to create complex user interfaces. You can now place buttons with a transparent background on top of a background image, let transparent buttons overlap or create transparency effects within buttons. The number of colors has increased from to 64k. Therefore the buttons look much more natural. ProntoPro NG has 32 Megabyte of memory. This enables you to download larger configuration files to ProntoPro NG.
Macros are now better integrated in the configuration file. Each button can be a macro, this means each button can contain more than one action. Your ProntoPro NG is able to set timers for certain actions to be carried out at any time you choose. Timers are not an entirely new feature of ProntoPro NG, but they are easier to use and better integrated with the configuration file.
You can activate and deactivate the timers you created and you can also set them to repeat daily or weekly. For instance, you can have the lights switched on every day at sunset. The Page Overview offers you a list of all the pages for one device. Every device comes with a Page Overview, making it easier and faster to browse through the device pages.
By default the cursor is programmed to operate devices. The functions assigned to the cursor button depend on the device active on ProntoPro NG. ProntoPro NG also offers you the possibility to use the cursor for navigating through devices and pages on the screen. The Left and Right cursor buttons allow you to scroll through the devices, with the Up and Down cursor buttons you scroll through the different pages. ProntoPro NG provides navigation feedback through graphical animations of mode transitions and page transitions.
This causes damage to the connector and the appliance. Make sure the wires of the battery pack do not get stuck while sliding the cover on. After a few seconds, the ProntoPro NG starts up automatically and an introduction screen appears.
The ProntoPro NG beeps twice to indicate that it has finished starting up. Because the battery pack is not fully pre-charged, you need to charge it as described below. For charging the ProntoPro NG, you have to place it in the docking station.
You can charge the ProntoPro NG at any time; the battery pack does not have to be entirely empty before recharging. You only need to set the clock. However, you should recharge the ProntoPro NG as soon as possible to ensure perfect performance.
Charging starts immediately. The blue charging LEDs on the front of the docking station indicate that the battery pack is being charged.
Normal charging time is 2 to 3 hours, depending on the condition of the battery pack. When the charging LEDs are flashing, an error has occurred. Try one of the following:. Note Only use your finger, a stylus or a blunt soft object like a pencil eraser to operate the touch screen. Press one of the 4 firm keys below the screen to activate the display default setting. Note When you press a hard button on ProntoPro NG, the according function will be executed immediately, while the 4 firm keys below the touch screen will activate the display.
Tilt ProntoPro NG more than 50 degrees default setting. When you have installed the battery pack and turned on ProntoPro NG, you have to set the current time. The Tools Menu appears. The Time button is selected. The Day button is selected. The Month button is selected. The Year button is selected. ProntoPro NG contains a series of customizable devices, each consisting of several device pages. All the available device pages are listed per device in the Page Overview.
Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a different circuit from the receiver.
FCC Information for Users. Reproduction in whole or in part is prohibited without prior consent of the copyright owner. Philips manuals. Complain wrong Brand wrong Model non readable. This manual is related to the following products: TSUB.
0コメント